HOLLO BLAST JR.

Four Sets Of Centering Collars Are Furnished With The Unit To Permit Adjustments To Various Sizes Within 1" To 2" Range. Tool By Itself Will Slide Into 3/4" I.D. Pipe.

Designed For Manual Travel Through Pipe. Before Blasting, Tool Is Pushed Through Pipe To The Opposite End. When The Air Is Turned On, The Operator Pulls The Tool Through Pipe At A Speed Necessary To Achieve Desired Degree Of Cleaning

Abrasive Is Accelerated And Propelled Through Specially Designed Nozzles. End Result Is High Velocity With Hard Impact On Surface That Will Remove The Most Stubborn Materials

Hollo Blast Jr. Features Include:

• 3/4" - 2" I.D. Pipe
• Tungsten Carbide Deflection Tip
• Requires 80 CFM Of Air
• Maximum Abrasive Size Is 30 Mesh
• Aluminum Oxide & Silicon Carbide Are NOT Recommended And Will Void Warranties
• Deflector Tip Gives 360 Degree Cleaning With No Need To Rotate Pipe
• Removes Rust, Paint & Other Contaminants
• Four Sets Of Centering Collars Are Furnished With This Unit To Permit Adjustment
          To Various Sizes Within The 1" To 2" Range
• Tool By Itself Will Fit Into 3/4" ID Pipe
• Designed For Manual Travel Through Pipe
• Weight: 3 Lbs.
   
  Reducer Is A $200.00 Value For Less Than $100.00 When Purchased With Hollo Blast Jr. (01098)
  Pipe Lance Extension Is Available At Extra Charge.  Please Call For Pricing Depending On Lengths.
   
  Please "View More Images" Under Picture Above

• Additional Information

  Select Here For Additional Information On The Clemco Hollo-Blast Jr.:
  Select Here FOr Operations Manual On The Clemco Hollo-Blast Jr.:
  
  

  Any damages or shortages MUST be noted on the carrier receipt at the time of delivery. Notify the carrier and Construction Equipment & Supply Co. immediately and we will assist you as fully as we can. Please retain a signed copy of the bill of lading or delivery receipt for your records.